Warning Messages
The batch display may shows soma error massage when counting, which means there are
soma problems with the machine. Refer to the following diagram to find way to solve it.
Message
Error Description
Required Actions
UU
Suspicious bill detected by UV
system;
Problem in the UV system.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the UV sensitivity.
nng
Suspicious bill detected by MG
system;
Problem in the MG system.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the MG sensitivity.
dbl
Double-note detected by IR
system;
Problem in the IR system.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the IR sensitivity.
dd
Note of size problem detected
by size
detection system;
Problem in the size detection
system
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the size checking sensitivity.
HALF
Half-note detected by half-note
detection system;
Problem in the half-note detec-
tion system.
Remove the suspicious bill from the stacker,
press "START" to continue.
CHN
Chain note
Remove the bill from the stacker, press
"START" to continue.
ER0
Problem with the left counting
sensor.
Clean the sensor or replace it.
EA1
Problem with the right counting
sensor
Clean the sensor or replace it.
EA2
Problem with the receiving
sensor
Clean the sensor or replace it.
EA3
Problem with the speed sensor Clean the sensor or replace it
Generally speaking, most of the above-mentioned problems may be caused by dust or dirt
inside the machine. So keeping the machine clean is highly recommended.
19
