Parts Description
1. Guard ornament
2. Front Guard
3. Plastic tighening ring
4. Spinner
5. Fan blade
6. Guard mounting nut
7. Rear guard
8. Motor shaft
9. Motor housing
10. Oscillation knob
11. Motor
12. Switch housing
13. Upper pipe
14. Pipe connector
15. Lower pipe
16. Pipe ornament
17. Pipe support
18. Stand A
19. Stand B
Operating instructions
Oscillation Control
1. Push the oscillation knob to oscillate
2. Pull the oscillation knob to stop
Operating instructions
1. Plug the power cord into a suitable socket
2. Tilt the head up or down to the required position by using a locking mechanism that will hold the
head in the desired position.
3. The fan is switched on using the push buttons on switch housing, i.e.
0 = Off, 1 = Low Speed, 2 = Medium Speed, 3 = High speed
Special Attention:
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
6
Summary of Contents for 10030090
Page 1: ...Standventilator 10030090...
