![background image](http://html1.mh-extra.com/html/oneconcept/10029203/10029203_manual_1635352019.webp)
19
4. Aligning suction tube .The con-
tainer contents are to be sprayed out
almost completely. When spraying
horizontal surfaces, turn suction
tube forward (A). When spraying
objects overhead, turn suction tube
back (B).
6. Place the spray gun in the gun
holder on the machine.
7. Put the machine down only on a
level, clean surface. Otherwise the
machine could suck in dust, etc.
8. Hang the machine on your shoulder
with the carrying belt.
9. Take the spray gun out of the spray
gun holder and point it at the target
object.
10. Push the ON / OFF switch on the
machine.
11. Adjust the spray setting on the
spray gun. Three different spray jet
settings can be chosen on the spray
gun, depending on the application
and target object.
5. Set the container on a sheet of paper, pour in the prepared coating material and screw
the container tightly onto the spray gun.
A
B
C
D
Selecting the Spray Setting
A
Vertical flat jet for vertical surfaces
B
Horizontal flat jet for horizontal surfaces
C
Circular jet for corners, edges and hard-to-reach surface
D
Wrong settings
Summary of Contents for 10029203
Page 1: ...Farbsprühsystem 10029203 ...