OneAccess One80XM, Installation Manual

Page: 20 / 47

One80XM Chapter 3
Installation Guide Router Description
20
3.3.2 LED States
The state of the LEDs indicates the following:
LED name Colour Description
Status Bicolour • OFF: No input power.
• ON - green: Switched on and operational.
• ON - red: Switched on and not operational.
• Blinking green: (Re)boot in progress.
Uplink Bicolour • OFF: None of the uplink interfaces (SHDSL, wireless) is config-
ured.
• ON - green: The SHDSL uplink is synchronised.
• ON - red: None of the uplinks is synchronised (although at least
one configured).
• Blinking green: None of the uplinks is synchronised but at least
one uplink synchronisation is in progress.
• Flashing green: The SHDSL uplink is not synchronised, but a
backup interface is up.
IP Bicolour • OFF: No IP routing has been configured.
• ON - green: All IP interfaces on the SHDSL link are up.
• ON - red: All IP interfaces are down.
• Blinking green: At least one IP interface is up and at least one is
not up on the active uplink.
• Flashing green: All IP interfaces on the backup link are up.
WLAN Green • OFF: Not in use.
• ON - green: The WLAN interface is up.
• Blinking green: Traffic in progress.
Aux - Not present.
Com - Not present.