Mini Mega-pixel IP Camera
10
Figure 2-1: Major components in the front panel
The major components on the
back panel
and bottom of the IP CAM products are
the followings:
1. Power jack – this is the place to plug in the power adaptor. The power needed for
this IP CAM is 12V/1.0A, please make sure you are using the correct power
adaptor.
2. Internal speaker – there is an internal speaker inside.
3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the
Ethernet link is ok, the Ethernet indication LED on the front side will be blue light.
Figure 2-2: Major components in the back panel
2.2. Quick installation and usage
There are only three things that you need to do to see the video from the IP CAM.
1. Connect the IP CAM to the home/office network.
2. Install the CamView/app software on the notebook/PC/mobiles.
3. Key in the ID/password of the IP CAM(from the ID/Password card) on the
Summary of Contents for OTP-MG610 Mini Mega-Pixel
