One Tech OTP-MG610 Mini Mega-Pixel, User Manual

Page: 34 / 59

Mini Mega-pixel IP Camera
34
3.10. Speaker Alarm settings
The IP Camera provides speaker alarm function, a video motion detection could
trigger the speaker alarm. The duration of the alarm could also be set. The related
settings are explained below:
1. Speaker alarm trigger– select the trigger mode of the speaker alarm
A. Motion trigger – if this is selected, the speaker alarm signal will be active
when video motion is detected. The detection sensitivity is set In the “motion
detection” page.
B. Schedule – if this is selected, the speaker alarm is scheduled according to
the settings of scheduling in section 3.13.
C. Disable–disable the speaker alarm.
2. Alarm loop times – this is the number of the loop times of the speaker alarm.
3. Alarm audio – you can use the default audio as the alarm audio or use your
recorded audio as the alarm audio. Just click the “Start Audio Record” to start
recording your own alarm audio. The maximum allowed record audio is 30
seconds.
Figure 3-17: Speaker Alarm Settings page