One Stop Systems PE3RR Manual Download Page 66 | Manualshive

Page: 66 / 75

background image

One Stop Systems

PE3RR PCI Expansion| 66

- Yes, if you had tried reseating the host card, the reconnecting the cable and power cycling the OSS and computer and still exhibited the same
issue

.

11.

Can I move the OSS PCIe host card to another PCIe slot on my computer motherboard?

- Yes, you can as long you follow the proper procedure. Shutdown the computer and expansion cassis, disconnect the cable and move the host
card to another PCIe slot.

12.

Can I replace the existing OSS power supply with a higher wattage power supply?

- Yes, you can as long as the power supply is certified by OSS.

13.

Can I connect the OSS expansion unit to computer that has a PCI slot?

- Yes, but you will need a different host card. You need a PCIHIF68 card.

14.

The OSS expansion unit is no powering ON, the backplane green LED is not coming ON also, do I have a dead power supply?

- Yes, you have a dead power supply. Make sure to recheck all your power connection and check the power supply switch make sure it is set to
ON position.

15.

I just purchased an old 3slot expansion unit on EBay and it is not working with my Mac Pro Tower, did I miss something?

- If you bought an old expansion on EBay and it is not working, most likely you have a defective / faulty OSS hardware.

16.

Can I connect my old OSS expansion unit to Mac Pro tower using the OSS PCIe host card ?

- No, older OSS expansion units have Dec Bridge chip that is not compatible with Mac Pro tower.

17.

Can I upgrade my 3slot expansion board and backplane to the latest revision ?

- Yes, as long as the expansion board and backplane are mechanically the same form factor as your original boards.

«
...
64
65
66
67
68
...
»

Summary of Contents for PE3RR












































































Reviews:

No comments

Related manuals for PE3RR

AllShare Cast Dongle

Brand: Samsung Pages: 2

Brand: D-Link Pages: 14

Brand: Quantum Pages: 20

Brand: CAP-XX Pages: 8

PowerBeam PBE-5AC-400-ISO

Brand: Ubiquiti Pages: 23

Brand: SeaLevel Pages: 21

Brand: Advantech Pages: 66

Brand: AC Infinity Pages: 24

Brand: H3C Pages: 68

Brand: Foxconn Pages: 1

Brand: Wavtech Pages: 8

Brand: ZyXEL Communications Pages: 263

Brand: Abov Pages: 8

Brand: Xaoc Devices Pages: 4

Brand: Acconeer Pages: 13

S5U13719P00C100

Brand: Epson Pages: 31

Brand: Epson Pages: 34

S1D15722 Series

Brand: Epson Pages: 77

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands