2.
Attach the cable by first pulling back on the retractor ring. With the keyed slot aligned with the connector key ridge on
the slot cover, insert the cable connector into the cable port connector on the board until the cable locks in place.
3.
The connectors on either end of the PCIe x4 cable are identical. Each connector is equipped with a
retractor to allow
the connector to be locked into place.
Retractor
on
Cable
Connector
Retractor ring
Alignment
grooves
4.
Attach the other end of the cable to the upstream port connector of the ELB in the expansion enclosure. To link to a
second expansion enclosure, connect a second cable from the downstream port connector on the ELB of the first
expansion enclosure to the upstream port connector on the ELB of the second enclosure.
Removing the Host Cable Adapter
:
1. Remove the cable by pulling on the green retractor ring which releases the locking mechanism.
2. Loosen and remove the screw before removing the Host Cable Adapter from the card slot.
Specifications
Electrical/Mechanical Specifications
Form Factor: x4 PCIe add-in card
Dimensions (H x L): 2.7 x 3.4 inches (68 x 86mm)
Front Panel Connectors: One PCIe x4 cable connector
Front Panel Indicators: Power On / Cable Present LEDs
Power Consumption (designed to meet the following conditions
3.75W typical, [email protected]
Operating Environment (designed to meet the following conditions)
Temperature Range: 0° to 50°C (32° to 122°F)
Relative Humidity: 10 to 90% non-condensing
Shock: 30g acceleration peak (11ms pulse)
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
Redriver
Pericom PI2EQX4402
Agency Compliance Designed to meet, but not tested
UL60950, FCC Class B, CE safety and emissions
One Stop Systems, Inc. Host Cable Adapter User Manual
Rev. A
3
