SKU 92248 For technical questions, please call 1-800-444-3353.
Page 5
Replacing the Batteries
1.
Located on the bottom of the Stone Solar Spot Light is a panel held in place
with four small Phillips Head Screws (4).
See Figure 2. Place the Stone
Solar Light over a working surface that is flat and clear of debris so that you
may easily retrieve the Phillips Head Screws if they are dropped. Using a
small Phillps Head screwdriver (not included), remove each of the screws
(4). Place screws in a secure location. Pull off the Top Panel (5) of the
Battery Compartment.
2.
Remove the Rubber Panel (6) from the Battery Compartment.
See Figure 3.
Pull out the Batteries (7) and replace with two new Batteries (7) of this same
type.
See Figure 4.
Figure 2
Figure 3
Screws (4)
Rubber
Panel (6)
Top
Panel (5)
Batteries (7)
Figure 4
Caution: Make certain that the batteries are installed with the positive and negative
poles as indicated inside the Battery Compartment. Use Ni-Cad batteries only.
3.
Replace the Rubber Panel (6) and the Top Panel (5) of the Battery Compartment.
Thread back in all four (4) Screws.
See Figure 4.
