Page 5
For technical questions, please call 1-888-866-5797.
Item 57696
Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Unplug the power uack from its electrical outlet before
performing any procedure in this section.
Cleaning and Maintenance
1.
CLEAN PERIODICALLY
with a
damp towel. Do not clean with
chemicals, solvents or harsh abrasives.
Do not put too much pressure on
the Light Fixture while cleaning.
2.
PERIODICALLY,
inspect the general
condition of the Light Fixture. Check for:
• loose hardware,
• misalignment or binding of parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
Troubleshooting
Problem
Possible Causes
Probable Solutions
Light Fixture
will not turn on
1. No power.
2. Bad bulb.
3. Disconnection or break
in landscape wire.
4. Too many Light Fixtures
connected to transformer.
1. Check power is on and
power unit is connected to
120VAC GFCI outlet.
2. Replace Light Fixture.
3. Check for loose connection at
power unit’s screw terminal.
4. Remove some Light Fixtures or
replace wire wit heavier gauge.
Only some
Light Fixtures
work
1. Bad bulb.
2. Bad connection at
Light Fixture.
3. Faulty Light Fixture.
1. Replace Light Fixture.
2. Check that connector pins
have pierced both wires.
3. Replace Light Fixture.
Follow all safety precautions whenever diagnosing or servicing
the tool. Disconnect power supply before service
