7
8
INSTALLING BATTERIES
1.
On the remote control’s back, push the tab and lift off the
battery cover.
2.
Obtain two (2) new AAA alkaline batteries. Match the +
and – marks on the batteries to the + and – marks in the
battery case, then insert the new batteries.
3.
Press the battery cover back into place. The tab should
click when the cover is locked.
4.
Test the remote control by pressing any mode key (e.g.,
TV
). If the batteries are inserted correctly, the
LED
(red
light) will blink.
N
NO
OT
TE
E:: W
Whheenn bbaatttteerriieess nneeeedd rreeppllaacceem
meenntt,, tthhee rreem
moottee ccoonnttrrooll w
wiillll ssttoopp ooppeerraatt--
iinngg.. R
Reem
moovvee tthhee oolldd bbaatttteerriieess aanndd iinnsseerrtt nneew
w oonneess w
wiitthhiinn 1100 m
miinnuutteess ttoo
eennssuurree aallll ooff yyoouurr pprrooggrraam
mm
miinngg iinnffoorrm
maattiioonn iiss rreessttoorreedd..
PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box. To control devices other than the default brands, perform the fol-
lowing steps; otherwise skip this section:
1.
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2.
On the remote control, press a device key once (i.e.,
DVD/VCR
,
CBL/SAT
, or
TV
).
NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo,
or TV/VCR/DVD Player Combo press
DVD/VCR
once. After program-
ming a VCR Combo device, you will be able to control channel selec-
tion, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR
Combo, or TV/DVD Player Combo, press
DVD/VCR
once. After pro-
gramming a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press
CBL/SAT
once.
3.
Press and hold
SET
until the
LED
(red light) blinks twice,
then release
SET
.
4.
Use the Manufacturer’s Codes (starting on page 34) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed cor-
rectly, the
LED
will blink twice.
NOTE: If the
LED
did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5.
Aim the remote control at the device and press
POWER
once. The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page
.
NOTE: If the device does not have a
POWER
key, press
PLAY
.
6.
Repeat steps 1 through 5 for each device you want to con-
trol.For future reference, write down each working device
code in the following boxes:
DVD/VCR
Code:
Device Type:__________________
CBL/SAT
Code:
Device Type:__________________
TV
Code:
Device Type:__________________
WALRB3P manual booklet 5/2/06 3:13 PM Page 7
Summary of Contents for ONE FOR ALL URC3220
Page 1: ......
