SETTING UP OTHER COMPONENTS
In addition to the components labeled on the device keys (TV, VCR, DVD/LD,
CBL/SAT, etc.), the
Cinema 5 can also operate the following components:
Cassette Decks, Video Accessories, Amplifier and Miscellaneous Audio
Components (Graphic Equalizers and Digital Music Service Boxes).
The Setup Codes for these components can be accessed under the following
device keys:
Cassette Decks:
Use the VCR Key
Video Accessories:
Use the CBL/SAT Key
Amplifier:
Use the RCVR Key
Miscellaneous Audio:
Use the RCVR Key
For example, to set up a Cassette Player on the VCR key:
1.
Turn on your Cassette Player and insert a tape.
2.
Press VCR and release. Press and hold SETUP until the
Cinema 5’s red light blinks twice, then release
SETUP.
3.
Enter the first four-digit Cassette Player code listed for your
brand in the “Setup Codes For Audio Cassettes” section. If
you perform this procedure correctly, the red light will blink
twice when you enter the final digit of your code.
4.
Aim the
Cinema 5 at your Cassette Player and
press PL (Play). Your Cassette Player should play your
tape. If your Cassette Player does not respond, repeat
steps 2-4, trying each code listed for your brand until you
find the one that operates your Cassette Player.
5.
Your
Big Easy HT Plus is now programmed to operate your
Cassette Player.
Remember, if you want to use your
Cinema 5 to operate your Cassette Player,
press the VCR key first.
Setup Codes For Audio Cassette Decks
Aiwa
0029, 0197
Carver
0029
Denon
0076
Harman/Kardon
0182
JVC
0244, 0273
Kenwood
0070
Magnavox
0029
Marantz
0029
Onkyo
0135, 0282
Optimus
0027, 0220
Philips
0029
Pioneer
0027, 0099, 0220
Sansui
0029
Sony
0170, 0243, 0291
Technics
0229
Victor
0273
Wards
0027
Yamaha
0094, 0097
Setup Codes For Video Accessories
Archer
0160
GC Electronics
0160
Jebsee
0160
Rabbit
0081
RadioShack
0160
Roctec
0456
SuperGuide
0169
TeleCaption
0171
Setup Codes For Integrated Amplifier/Preamplifiers/Amplifiers
Carver
0269
Curtis Maths
0300
Denon
0160
GE
0078
JVC
0331
Linn
0269
Luxman
0165
Magnavox
0269
Marantz
0269, 0321
Nakamichi
0321
Optimus
0013, 0300, 0395
Panasonic
0308
Pioneer
0013, 0300
Realistic
0395
SEARCHING FOR YOUR CODE
If your TV, VCR or Cable Converter does not respond to the
Cinema 5 after
trying all of the codes listed for your brand, or if your brand is not listed at all, try
searching for your code. For example, after trying all of the codes for your TV,
you still cannot get the
Cinema 5 to operate your TV, then:
1.
Turn on your TV.
2.
Press TV and release. Press and hold SETUP until the
Cinema 5's red light blinks twice, then release SETUP.
3.
Press 9 - 9 - 1.
4.
Slowly alternate between pressing POWER* and TV until
your TV turns OFF. Make sure that the
Cinema 5 is aimed at
your TV during the search. You may have to press this
sequence of buttons (POWER* then TV) up to
100 times to search the entire library of codes.
5.
When your TV turns OFF, press and release SETUP to
lock in the code for your TV. Your
Cinema 5 is now
programmed to operate your TV.
*Some VCR, LD or DVD player do not have POWER key on the original remote.
If so turn on the VCR/DVD/LD player manually, insert a tape or CD and start
playing. Start the code search process and use STOP key instead of POWER.
When the device responds, press and release the SETUP key to lock in the
code. RED LED will blink twice.
NOTE: To search for the codes of your other components, repeat Steps 1
through 5, only substitute the appropriate device key (VCR, DVD/LD, RCVR or
CBL/SAT) for the component you are searching for.
RETRIEVE THE CODES PROGRAMMED IN THE
Big Easy HT Plus
If you have set up the
Cinema 5 using the “SEARCHING FOR YOUR CODE”
procedure, you may want to figure out which four-digit code is operating your
equipment. Use this procedure after you have set up your components to find
out which four-digit code is operating your equipment. For example, to find out
which code is operating your TV after setting up your TV using the “SEARCH-
ING FOR YOUR CODE” procedure:
1.
Press TV and release. Press and hold SETUP until the
Cinema 5’s red light blinks twice, then release SETUP.
2.
Press 9 - 9 - 0.
3.
For the first digit of your four-digit code, press 1 and count
the number of times the red light (LED) blinks on the
Cinema 5. If the light does not blink when you press the
number 1, the digit is zero.
4.
For the second digit, press 2 and count the number of
times the red light (LED) blinks on the
Cinema 5. If
1
1
9-9-0
9-9-0
2
2
the light does not blink when you press the number 2, the
digit is zero.
5.
For the third digit, press 3 and count the number of times
the red light (LED) blinks on the
Cinema 5. If the light
does not blink when you press the number 3, the digit
is zero.
6.
For the fourth and final digit, press 4 and count the number
of times the red light (LED) blinks on the
Cinema 5.
If the light does not blink when you press the number 4, the
digit is zero. Now you have your four-digit code.
NOTE: To find out the code for your other components, repeat Steps 1
through 6, only substitute the appropriate device key (VCR, DVD/LD,
RCVR or CBL/SAT) for the component code you wish to learn.
3
3
4
4
9-9-1
9-9-1
