16
Hot backup
：
The input signal hot backup function, that is, after the current input signal is lost, the
processor automatically switches to the backup input signal to avoid the output image interruption
caused by the source failure.CV1/CV2 is a group, DVI/HDMI is a group.
VGA automatically correction
：
automatic to correct the VGA input image position and phase position.
ADC
calibration:
Analog signal white balance correction,click [OK]button to correct the white balance to
input analog signal automatically(CV1,CV2 VGA )input signal source need to be calibrated individually
for each port.).
Note: the processor has done white balance correction for standard signal source before
leaving the factory. Please use this setting carefully.
Seamless switching:
used to set the switching effect between signal sources. Includes :fade in and fade
out.
Key lock
：
panel lock function,when open the key lock function,then the device panel key will be not valid
to work no matter press any key.
OSD menu setting
：
adjust the display starting position on the the controller remote menu
Voice volume setting
：
only input signage source to HDMI when the voice open or close ,Adjust range 0-30
，
adjust HDMI or SDI audio volume
Factory reset
：
System initialization settings, The system parameters will be reset to factory
value.Usually we do not suggest users to do it.
Device user guiding
Before to use the guiding mode ,please set the system output resolution first.if there is no saved
mode , the system will lead the users to the guiding mode in order to use the device quickly.There are 3
steps for the guiding mode
Step 1
：
Power on,start the machine
Summary of Contents for OVP-M3
Page 1: ...OVP M3 User Manual OVP M3 USER MANUAL...
Page 25: ...22...
