www.onbonbx.com
第 9 页
Basic steps
Click [OK] to enter the main menu interface, and then follow the steps
below to set the controller:
The first step: Set LED screen parameters (width, height, network port
width and height and start) according to the size of the LED screen;
Step 2: Select the corresponding signal source according to the signal
source required by the user;
Step 3: If necessary, make appropriate adjustments to the "display
window";
Step 4: Select "Mode Save" or press the [SAVE] key to enter the
"Mode Save" menu to save the current display mode for next recall
Note: For detailed instructions on the above four steps, please refer to
the next chapter "Introduction to Main Menu".
Menu
Menu button operation
The key operation area related to the menu is the MENU area,
including a knob, a confirmation key [OK], a return key [] and a [GUIDE]
key.
In the initial state of the system, short press [OK] to enter the main
menu setting interface. When the return key is pressed, the menu system
will return to the previous menu in order until it returns to the initial state
.In the browsing state, turn [Knob] counterclockwise to move the
cursor upward or left; turn [Knob] clockwise to move the cursor downward
or right. When the cursor is moved to the item to be adjusted, press the
[OK] key to enter the corresponding setting sub-menu. At this time, turn the
[knob] counterclockwise to decrease the current parameter value; turn the
