www.onbonbx.com
第 16 页
LED screen total width <= 4000
LED screen total height <= 3840
And the total number of points on the LED screen can not exceed 5 million
points.Value range of OUT1~OUT4 output port:Width 0~4000, height
0~2000
Note: When the width and height of an output port in OUT1~OUT2 is 0, it
means that the output port has no output.
Layout
Pls go to the layout image by press OK when at the status of non-menu.
Horizontal width: the adjustment range is 120 ~ the maximum number of
points can be set in the horizontal direction.
Vertical height: the adjustment range is 68 ~ the maximum number of
points can be set in the vertical direction.
Horizontal start: The minimum value is 0, and the maximum value is the
maximum number of horizontal points minus the horizontal width.
Vertical start: The minimum value is 0, and the maximum value is the
maximum number of vertical points minus the vertical height
note:
(1) Up to 4 screen display windows can be opened in each splicing mode,
and the screen 1 window is always open
(2) When two or more screens are open, if the screens overlap, it may
cause display confusion;
(3) Click the "MODE" shortcut key on the front panel to enter the system
"fixed mode call" menu, you can quickly open the desired screen display
window.
(4) The picture display window can float arbitrarily between each DVI
output window OUT1~OUT2 without its boundary.
(5) The screen display window opened outside the size mapping range of
the LED screen can be used as the input source monitoring window.
1. LAN OUTPUT SETING
In the non-menu state, click the [OK] button to enter the main menu,
