LV8548MCSLDGEVB for Brush DC motor
www.onsemi.com
9
How to use the GUI Log
The log screen in the GUI shows the serial data sent to Arduino to control its API functions.
⑪
Saving the GUI Log
By pressing the
“SAVE” button, the content displayed on the work log can be saved as a .txt file or a .csv
file.
⑫
Clear GUI Log
By pressing the “CLEAR” button, the content displayed on the work log will be erased.
⑬
Program Generation
Pressing the
“Generate Program” will output the executed API functions on the work log into a .ino
program file that can be uploaded directly with Arduino. By writing the output of the .ino file to Arduino,
motor control can be executed automatically through standalone operation according to the procedure
generated through the GUI Log.
For more details regarding the Arduino program generation function, refer to the attached Appendix under
⑬
Arduino Program Automatic Generation.
i.
Set Frequency
ii.
Set PWM mode
iii.
Set Duty Ratio
iv.
Toggle Start/Stop
i.
Set Frequency
Executed
iii.
Set Duty Ratio
Executed
iv.
Start/Stop
Executed
ii.
Set PWM
Executed
⑪
⑬
⑫
