LV8548MCSLDGEVB for Brush DC motor
www.onsemi.com
2
Contents of the Kit
Hardware
• LV8548MCSLDGEVB
：
Motor driver module
• ONBB4AMGEVB
：
Baseboard
• Arduino Micro
• USB Cable (Micro B-A)
• USB Thumb Drive
• Flat-tip Screw Driver
• Brush DC Motor - RC-260RA-18130 (MABUCHI motor) 1pc
(Stepper motor 1pc)
Software
(Included in USB Thumb Drive)
Software Setup
Please download
found on the provided USB flash drive to any
preferred directory.
(E.g. Libraries\Documents or Desktop)
API Library
Following process should be operated with
the
Arduino Micro disconnected.
①
Double click on the Arduino sketch
.
This will launch the Arduino IDE.
(Check the Appendix if the Arduino IDE is not
installed)
The IDE will display the following message when
the LV8548_DC_Program.ino file is opened for the
first time.
Click “OK” to continue.
This message will be displayed if the .ino file is not
inside of a folder with the same name. (E.g.
Sketch12345.ino must be in the Sketch12345
folder).
・・・
GUI as well as .NET Framework4.6.1 Installer
・・・
Arduino IDE Installer
・・・
API Library
・・・
Instructions for operation and setup (This document)
・・・
GUI
– Arduino Firmware
・・・
Stepper Motor Files
（
Refer to Stepper Motor Manual
）
・・・
Appendix for supplementary material
・・・
.NET Framework Related Files
・・・
GUI Related Files
・・・
Installer package in Japanese
