background image

2

C a u t i o n s ,   W a r n i n g s   &   S a f e t y   I n s t r u c t i o n s

Important Safety Instructions

     WARNING: HIGH VOLTAGE / ATTENTION : HAUTE TENSION

AVOID SERIOUS INJURY OR DEATH FROM ELECTRICAL SHOCK. BEFORE OPENING TURN OFF AC SUPPLY POWER.
CHOC ELECTRIQUES PEUVENT PROVOQUER LA MORT OU DE SERIEUSE BLESSURES. AVANT D'OUVRIR LA BOITE,
COUPER LE COURANT.

     CAUTION:

- HOT SURFACES - TO REDUCE THE RISK OF BURNS, DO NOT TOUCH.
- CHARGE ONLY USER SELECTABLE TYPE BATTERIES (FLOODED, AGM, OR GEL) OTHER TYPES OF BATTERIES
  MAY BURST CAUSING PERSONAL INJURY AND DAMAGE
- RISK OF ELECTRIC SHOCK. NO USER SERVICEABLE PARTS. RETURN TO MANUFACTURER FOR SERVICING
- THIS CHARGER IS MEANT FOR CONTINUOUS DUTY

     ATTENTION :

- SURFACES CHAUDE-NE PAS TOUCHER, RISQUES DE BRULURES
- UTILISER POUR ATTENTION: CHARGER UNIQUEMENT LES BATTERIES DU TYPE (PLOMB/ACIDE OU PLOMB/GEL/AGM).
   D’AUTRES TYPES DE BATTERIES POURRAIENT ÉCLATER  ET CAUSER DES
   BLESSURES OU DOMMAGES
- RISQUE DE CHOCS ELECTRIQUE-RETOURNER AU FABRIQUANT POUR SERVICE.
- CE CHARGEUR EST FABRIQUE POUR LE DEVOIR CONTINU

    WARNING: LOW VOLTAGE / ATTENTION : BASSE TENSION

ELECTRICAL BURN AND SPARK HAZARD. BEFORE OPENING DISCONNECT CHARGER CONNECTIONS AT BATTERY(S).
(DANGER DE BRULURES ELECTRIQUE ET ETINCELLES). AVANT D'OUVRIR LA BOITE DECONNECTER LES
CONNECTIONS ENTRE CHARGEUR ET BATTERIE.

Before connecting to batteries or AC power, read all instructions and cautionary markings
on the battery charger and batteries. Do not discard this manual, save it for future reference.

1. SAVE THESE INSTRUCTIONS / CONSERVER CES INSTRUCTIONS. CE MANUEL
CONTIENT DES INSTRUCTIONS

 - This manual contains important safety and operating

instructions for all ProTech-C battery chargers.

2. Do not expose charger to rain or snow.

3. Use of attachments not recommended or sold by On Board Solutions will void warranty
and may result in a risk of fire, electrical shock or personal injury.

4. Do not operate the charger if it has received a sharp blow, direct hit of force, been
dropped or otherwise damaged in any way; take it to a qualified serviceman.
5. Do not disassemble the battery charger. If service or repair is required contact your local
dealer.  Incorrect reassembly may result in a risk of electric shock or fire.
6. To reduce the risk of electrical shock, remove 120 volt or 240 volt AC power.  Also remove
DC battery connections prior to any maintenance or cleaning. Turning off controls will not
reduce this risk.

 

WARNING AVOID SERIOUS INJURY OR DEATH FROM FIRE, EXPLOSION OR ELECTRICAL SHOCK

- Make connection in an open atmosphere free of explosive fumes.

     WARNING: HIGH VOLTAGE / ATTENTION : HAUTE TENSION

AVOID SERIOUS INJURY OR DEATH FROM ELECTRICAL SHOCK. BEFORE OPENING TURN OFF AC SUPPLY POWER.
CHOC ELECTRIQUES PEUVENT PROVOQUER LA MORT OU DE SERIEUSE BLESSURES. AVANT D'OUVRIR LA BOITE,
COUPER LE COURANT.

     WARNING / AVERTISSEMENT :

DO NOT EXPOSE TO RAIN OR SPRAY / NE PAS EXPOSER AUX INTEMPÉRIES

13

P e r i o d i c   M a i n t e n a n c e

Process:

When:

For Flooded (Wet) batteries, follow the manufacturers’ instructions
to monitor and maintain proper levels of distilled water. 

(not tap

or bottled water that contains minerals)

 in each battery

Monthly

Periodic Maintenance

Process:

When:

Visually inspect all wiring for cuts and abrasions. Contact On
Board Solutions if charger needs to be serviced.

Monthly

Process:

When:

Clean and tighten all battery connections.  Follow
manufacturer's instructions for cleaning a battery. Clean all
battery terminals with a wire brush where required and tighten
all battery connections.

Monthly

Summary of Contents for ProTech-C 4815









Reviews: