OV1015 | 7
User Guide: OV1015
SAFETY INFORMATION
DO NOT OVERLOAD DESK
To prevent workstation from tipping or collapsing, make sure the tray is not overloaded by the weight of
objects on tray. Evenly distribute load; excess loads near edges can reduce stability and lead to tip over.
• Do not exceed maximum load of 35 lb. (16Kg) on tray
• Do not sit or stand on table
USE CARE WHEN MOVING WORKSTATION
• Clear objects and equipment from workstation before moving to reduce the risk of tipping over.
• Adjust the workstation to its lowest height before moving
• To disconnect, turn all controls to the off position, then remove plug from outlet
• Do not move a loaded workstation
• Do not lift the workstation by the tray
DO NOT OPEN ELECTRICAL COMPONENTS
Do not attempt to service components. There are no user-serviceable parts inside the motor control units
or legs. If your workstation needs service, contact customer service. Never operate this furnishing if
it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged. Return the
furnishing to a service center for examination and repair.
KEEP WORKSTATION DRY
Keep all electrical components away from water and high humidity. Clean only with a dry or
slightly damp cloth. Do not spray cleaning solutions directly onto workstation.
GROUNDING INSTRUCTIONS
This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug.
Use only the cord provided.
Make sure that the product
is connected to an outlet having the same configuration
as the plug (as shown in Illustration A) that is properly
installed and grounded in accordance with all local
codes and ordinances.
Do not modify the plug provided with the product
– if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
No adapters are to be used with this product.
Keep cord away from heated surfaces.
Grounded
Outlet
Grounded Outlet Box
Grounding
Pin
Grounded
Outlet
Grounded Outlet Box
Grounding
Pin
ILLUSTRATION A
