User Guide: OV1015
10 | OV1015
ASSEMBLY INSTRUCTIONS
ASSEMBLE THE FEET TO THE MOTOR BOX
Lay column assembly on it’s back as shown in diagram above. Insert the base feet
tabs into the corresponding slots on the column base. Insert angled feet into column
base as shown. Fasten each foot to the column base with the M6x1.0 20mm button
head screws. Fully tighten screws with the provided 4mm Allen wrench.
2
1
11
Internal parts removed for better view
7
3
10
9
ATTACH RUBBER PADS TO TRAY
Attach two bumper pads to the underside of the tray as shown below.
Pads should be placed on flat surface inward from corner weld.
3
