![background image](http://html.mh-extra.com/html/omron/zx-t/zx-t_brochure_1633400004.webp)
Features and benefits of the ZX-T series
Plug & Play with auto-scale
Innovative chip technology inside each sensor head makes the
ZX-T plug-and-play; there’s no re-calibration required when you
change a sensor head, which minimises down-time and makes
maintenance easy. In addition, the amplifier automatically
displays the measurement distance when it is connected to the
sensor head. An extension cable (the ZX-XC_A) can be used
to extend the connection by up to 10 metres without any affect
on the sensor characteristics.
Long-life structure
The ZX-T features a unique ball-bearing structure that ensures
a long service life for the sensor head. Sliding parts move
smoothly while the rubber sleeve keeps dust out.
Different rubber sleeves provide measurement ranges from
1mm to 4mm with a resolution of 0.1µm.
Multi-point calculation
An internal bus in the ZX-T enables up to 8 sensors to be
connected for multi-point calculation. Using one sensor as
reference, up to 7 points can be added or subtracted to get
the most even calculation result.
Pressing force alarm
Problems caused by excessive pressing force during
a measurement situation can be detected in advance, and
a signal can generated to prevent malfunctions.
Warming-up display
Once the power is turned on, a display on the ZX-T indicates
when the sensor head has warmed up to its optimum
measurement condition to ensure the most accurate readings.
Auto-key saves set-up values
The Auto-key feature uses innovative transducer technology
to eliminate the need for master adjustment and origin
calculation each time the sensor is started up. Even after
a power interruption the values are retained so there’s
no need to reset the origin.
6mm dia.