Omron ZUV Series, User Manual

Page: 82 / 126

4-14
Section 4
CONNECTING TO EXTERNAL DEVICES
ZUV
User’s Manual
Section 4
Connection by USB/RS-232C
Communication Commands
To communicate with an external device, switch the controller to the READY mode. In the LOCK mode,
a communication cannot be established with the external device.
■
Non-procedural command list
Command Name Details
Reference
Pages
START Starts irradiation of UV light. p.4-16
STOP Stops irradiation of UV light.
BANKGET Obtains the bank No. p.4-17
BANKSET Switches banks. p.4-18
DATASAVE Saves the setting data to flash memory in the controller. p.4-19
BANKLOAD Loads bank data. p.4-20
BANKSAVE Saves bank data.
SYSLOAD Loads system data. p.4-21
SYSSAVE Saves system data.
PATNGET Obtains irradiation patterns. p.4-22
PATNSET Sets irradiation patterns. p.4-23
PNAMEGET Obtains irradiation pattern names. p.4-24
PNAMESET Sets irradiation pattern names. p.4-25
DATAGET Obtains the irradiation conditions of the respective channel. p.4-26
DATASET Sets the irradiation conditions of the respective channel. p.4-27
LOGDATA Obtains irradiation log data. p.4-28
ACCUMGET Obtains the cumulative energy. p.4-29
SYSGET Obtains system data. p.4-30
SYSSET Sets system data. p.4-32
CALIBGET Sets the reference value for power tuning. p.4-34
CALIBSET Executes power tuning.
VERGET Obtains system version information. p.4-35
HDATACLR Initializes the cumulative irradiation energy and power tuning
data saved on the controller. p.4-36