4-27
ZUV
User’s Manual
Section 4
CONNECTING TO EXTERNAL DEVICES
Section 4
Connection by USB/RS-232C
DATASET command
This command sets the irradiation conditions of the respective channel.
(1)
Parameter description
The following parameters can be set by the DATASET command:
(2)
Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command.
DATASET <Channel No.> <Parameter No.> <Write
data>
OK
Parameter
Setting Range/Output Range
Channel No.
0: Channel 1
1: Channel 2
2: Channel 3
3: Channel 4
Parameter No.
32: Irradiation mode
33: Irradiation power
34: Irradiation time
35: Irradiation pattern
38: Irradiation time and type
Write data
When setting irradiation mode:
0: OFF
1: CONSTANT
2: PATTERN
When setting irradiation power:
0 to 100
When setting irradiation time:
0 to 9999 (*0.1s)
When setting irradiation pattern:
0 to 15 (Actual pattern No. - 1)
When setting the irradiation time
type:
0: SETTING
1: UNLIMITED
DATASET 0 32 1
←
Constant irradiation is set to channel 1.
DATASET 1 35 15
←
Pattern 16 is set to channel 12.
OK
←
Command execution ends successfully.
Command
Delimiter
Delimiter
Response
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Delimiter
Summary of Contents for ZUV Series
