Setting Logging Conditions
32
ZG2-DSU User’s Manual
Setting Logging Conditions
Set which data is to be logged. You can select from the following five logging conditions.
• Only at an NG/only at an OK
• All conditions
• At a fixed cycle
• At individual fixed counts
• At a logging cycle specified by an external signal
Logging Only at an NG/Only at an OK
Set logging according to the judgment result of a specific Sensor Controller.
FUN mode-[SOURCE]-[LOGGING]-[MEAS]
Logging by All Conditions
Logging is performed by all conditions regardless of judgment result.
FUN mode-[SOURCE]-[LOGGING]-[MEAS]
Setting value
Description
CH
Selects the channel of the Sensor Controller whose judgment result
is to be monitored.
JUDGE
NG+ERROR: Logging is performed only when the overall judgment
of the CH currently being monitored is NG and ERROR.
NG: Logging is performed only when the overall judgment of the
CH currently being monitored is NG.
PASS: Logging is performed only when the overall judgment of the
CH currently being monitored is PASS (OK). (default value)
Setting value
Description
CH
Select the channel of the connected Sensor Controller. When two
Controllers are connected, either Sensor Controller may be
selected.
JUDGE
Select [All].
Summary of Contents for ZG2-DSU
