4
In
tr
od
u
ct
io
n
Limitat
ions a
bout
M
odel V70
0
-HMD13
V700-L11
User's Manual
Introduction
When a Model V700-HMD13 (not Model V700-HMD13
) is used to configure a system, there will be the
operating limitations described below.
<Description of limitations>
Among the memory page1 1 through 30 on an ID tag, page 1 through 12 are available to the user. Do not
access to page 13 to 30 with commands. However, note that data read/write is possible with a plurality of
pages as a block.
(1) Operation to read data in page 1 through 30 as a block
The data read process is divided into two steps: read of page 1 through 14 and that of page 15
through 30.
➀
0100 0000FFFC [CR]
➁
0100 FFFF0000 [CR]
(2) Operation to write data in page 1 through 30 as a block
➀
0200 0000FFFC (write data with page 1)(write data with page 2)
... (write data with page 14) [CR]
➁
0200 FFFF0000 (write data with page 15)(write data with page 16)
... (write data with page 30) [CR]
(3) Operation to write data in page 3 through 30 as a block
The data write process is divided into two steps: write of page 3 through 14 and that of page 15
through 30.
➀
0200 0000FFF0 (write data with page 3)(write data with page 4)
... (write data with page 14) [CR]
➁
0200 FFFF0000 (write data with page 15)(write data with page 16)
... (write data with page 30) [CR]
A RFID system configuration using Model V700-HMD13A will serve free of the above-mentioned
limitations.
Limitations about Model V700-HMD13