Omron V700-HMC71, Operation Manual

Page: 15 / 23

(15/23)
4.2 Command/Response Format
n
Command
The frame consists of an operation option, parameters, and terminator.
Communication options can be attached to commands No. 01 through 08 only.
Command Option Parameter 1 ~ Parameter n Terminator
Cr
n
Response
The frame consists of a completion code, parameters, and terminator.
Completion
code
Parameter 1 ~ Parameter n Terminator
Cr
(1) Types of Commands
Specifies the process of the R/W Module
Command
Name
Number Details
Read 01 Reads Tag Memory data in units of pages
Write 02 Writes data onto Tag Memory in units of pages
Multiple Write 03 Writes the same data onto Tag Memory in units of
pages
Byte Write 04 Writes data onto Tag Memory in units of bytes
Write
Protection 08 Specifies setting or to undo write protection per
page
ACK 11 Is sent when User board successfully receives data
NACK 12 Is sent when User board does not receive data
successfully
STOP 13 Stops processing of command being executed
Oscillation ON 14 Activates Oscillation Mode on Module Antenna
Oscillation OFF 15 Stops Oscillation Mode on Module Antenna
Test 10 Transmits data received directly back to User board