Omron V700-HMC71, Operation Manual

Page: 10 / 23

(10/23)
3.3 Input STOP
When a STOP signal is input to the R/W Module, receiving and processing of
commands and command processing will stop and then, after the STOP signal is
deactivated, the Module will be on stand by for new commands. When the STOP
signal is input, oscillation will stop regardless of the setting of the oscillation control
mode.
If a STOP signal is input more than 50 msec prior to shut down, writing of unstable
data to the Tag may be prevented. However, if writing of the command in process
requires more than one page, not all pages may be completely rewritten.
3.4 Memory Management on Tag
The Tags used to conduct communication with the R/W Module may be one of the
following two types depending on memory capacity: 128 bytes (user area 112 bytes)
or 256 bytes (user area 240 bytes). The memory area recognizes every 8 bytes as
one page, distinguished by such addresses as 00h ~ 07h, 08h ~ 0Fh, and so on.
n
Memory Map (00h ~ EFh indicates to address)
Page 8 bytes / page
1 00h 01h 02h 03h 04h 05h 06h 07h
2 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh
3 10h 11h 12h
⋅⋅⋅ ⋅⋅⋅
17h
4 18h 19h 1Ah
⋅⋅⋅ ⋅⋅⋅
1Fh
5 20h 27h
6 28h 2Fh
7 30h 37h
8
9
10 : :
11 : :
12
13
14 68h
⋅⋅⋅ ⋅⋅⋅
6Fh
15 70h
⋅⋅⋅ ⋅⋅⋅
77h
16 78h
⋅⋅⋅ ⋅⋅⋅
7Fh
: : :
: : :
29 E0h E1h
⋅⋅⋅ ⋅⋅⋅
E7h
30 E8h E9h
⋅⋅⋅ ⋅⋅⋅
EFh
112 bytes
240 bytes