![background image](http://html1.mh-extra.com/html/omron/v670-cf01/v670-cf01_user-manual_741961084.webp)
82
SEC
TI
O
N
6
C
h
a
ra
c
te
ri
s
tic
s
Da
ta
Ba
s
e
d on Ope
ra
tin
g
Cond
it
ions
Electromagnetic Inductive RFID System
User's Manual
SECTION 6
Appendices
Chemical Resistance of Tags
Chemicals that affect Tags are shown below.
ABS resin is used for case material and epoxy resin for filling material. Refer the following lists and do
not use chemicals that effect ABS and epoxy resin. Use only chemicals that do not effect these resins.
Tags cannot be used in applications with explosion-proof specifications.
The above results are from tests conducted at room temperature (23
°
C). Even if the chemicals do not affect the ABS or
epoxy resins at room temperature, they may affect the resins at higher or lower temperatures. Always contact the man-
ufacturer of the chemicals and check the chemicals carefully in advance.
Chemicals That Cause Deformations, Cracks, etc.
ABS resin
Epoxy resin
Trichlene, acetone, xylene, toluene, gasoline, creosol,
methylene chloride, phenol, microhexanone, aqua regia,
chromic acid, sulfur (90% RT), methyl ethyl ketone, aniline,
nitrobenzene, monochlorobenzene, pyridine, nitric acid (60%
RT), and formic acid (80% RT)
Aqua regia, chromic acid, sulfuric acid (90% RT), nitric acid
(60% RT), liquid ammonia, acetone, methylene chloride,
phenol, and trichlene.
Chemicals That May Cause Discoloration, Swelling, etc.
ABS resin
Epoxy resin
Hydrochloric acid, alcohol, freon, sodium hydroxide, hydrogen
peroxide, benzine, sulfuric acid (10% RT), nitric acid (10%
RT), phosphoric acid (85% RT), liquid ammonia
Sulfuric acid (10% RT), nitric acid (10% RT), hydrochloric acid
(30% RT), acetic acid (50% RT), nitric acid, calcium hydroxide,
benzene, creosol, alcohol, microhexanone, toluene, xylene,
benzine, and grease.
Chemicals That Do Not Affect ABS Resin or Epoxy Resin
ABS resin
Epoxy resin
Ammonia, kerosene, mineral oil, developer, YUSHIROKEN
S50, CHEMICOOL Z, VELOCITY NO. 3, YUSHIROKEN EEE-
30Y, petroleum, grease, acetic acid, nitric acid, calcium
hydroxide, phosphoric acid (30% RT), hydrochloric acid (10%
RT), and potassium hydroxide.
Ammonia, hydrochloric acid (10% RT)), potassium hydroxide,
petroleum, gasoline, YUSHIROKEN S50, CHEMICOOL Z,
VELOCITY NO. 3, and YUSHIROKEN EEE-30Y.
Summary of Contents for V670-CF01
Page 2: ......