4
Outline of Operation
Section 1-3
1-3
Outline of Operation
When a command is sent from the host computer (FC, IBM XT/AT compatible)
to the ID Controller, the R/W Head (or R/W Antenna) enters the stand-by
state, waiting for a signal from the DC.
When a DC enters the area where it can communicate with the R/W Head,
the data (model number and data for processing or inspection) of a memory
area specified by the command can be written or read to or from the DC or a
response transmitted to the host computer. For example, when the memory
contents of the DC have been read, the host computer transmits a command
on how to process or test a workpiece to a Programmable Controller (PC).
When the processing or testing has been completed, the PC transmits pro-
cess or test data to the host computer.
To next processing
Pallet
Processing/inspection
Pallet
Data carrier
R/W Head or R/W Antenna
Reading data
specifying
processing
Programmable
Controller (PC)
ID Controller
Host computer: FC, IBM XT/AT
Summary of Contents for V600 RFID System
