Omron V550-A20, Operation Manual

Page: 24 / 76

10
V550-A20 Operation Manual
Section 2-
10
What to Do After Receiving the V550-A20
Cradle Mounting Bracket (part # V559-M26B)
There is one cradle mounting bracket, one 2-1/8" #6-32 round spacer,
two 3/8" #6-32 socket head cap screws, two #6 flat washers, and two
#6 split lockwashers included with this assembly. The cradle mount-
ing bracket is designed to hold the V550-A20 in a position so the scan
line is parallel to the mounting surface. Four #6-32 Pem nuts are
provided on the bottom of the bracket.
To mount the V550-A20:
The top edges on both sides of the cradle are bent at a
90 degree angle. This results in two flanges that fit
into the slots on the sides of the V550-A20. There are
six slots on each side of the V550-A20. Different sets of
slots can be used with the following results:
Bottom Slots:
overall height (bracket and V550-A20) - 2.75"
Four up from bottom:
overall height (bracket and V550-A20) - 2.05"
1.50
.24
.46 1.40
PEM S-632
4 PL
Mounting The V550-A20 Using The
Cradle Bracket
Units = inches