![background image](http://html.mh-extra.com/html/omron/tl-w/tl-w_datasheet_1633299003.webp)
D-55
TL-W
TL-
W
DC 3-wire Models
Model
Item
TL-W1R5M
#
1
TL-W3M
##
TL-W5M
##
TL-W5E
#
/F
#
TL-W20ME
#
Sensing distance
1.5 mm ±10%
3 mm ±10%
5 mm ±10%
20 mm ±10%
Setting distance
0 to 1.2 mm
0 to 2.4 mm
0 to 4 mm
0 to 16 mm
Differential distance
10% max.
1% to 15% of
sensing distance
Sensing object
Ferrous metal (refer to Engineering Data for non-ferrous metal on page E-55)
Standard sensing
object
Iron, 8 x 8 x 1 mm
Iron, 12 x 12 x
1 mm
Iron, 18 x 18 x 1 mm
Iron, 50 x 50 x
1 mm
Response frequency 1 kHz min.
600 Hz min.
500 Hz min.
300 Hz min.
40 Hz min.
Power supply
(Operating voltage
range)
12 to 24 VDC (10 to 30 VDC) ripple (p-p): 10% max.
10 to 30 VDC with a ripple (p-p) of
20% max.
12 to 24 VDC (10
to 30 VDC) ripple
(p-p): 10% max.
Current consumption 15 mA max. at 24 VDC (no-load)
10 mA max.
15mA max. at 24 VDC (no-load)
8 mA at 12 VDC,
15 mA at 24 VDC
Control
output
Switching
capacity
NPN open collector 100 mA max.
(30 VDC max.)
NPN open col-
lector 12 VDC
50 mA max.
(30 VDC max.)
24 VDC 100 mA
max. (30 VDC
max.)
200 mA
12 VDC
100mA max.,
24 VDC
200 mA max.
Residual
voltage
1 V max. (under load current of
100 mA with cable length of 2 m)
1 V max. (under
load current of
50 mA with cable
length of 2 m)
2 V max. (under load current of
200 mA with cable length of 2 m)
1 V max. (under
load current of
200 mA with ca-
ble length of 2 m)
Indicator lamp
Detection indicator (red LED)
Operating status
(with sensing object
approaching)
NO
C1 models: NO
C2 type: NC
E1 models, F1 models: NO
E2 models, F2 models: NC
Protective circuits
Reverse connection protection, surge absorber
Ambient temperature Operating/Storage: -25°C to 70°^C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95%RH (with no condensation)
Temperature influ-
ence
±10% max. of sensing distance at 23°C within the temperature range of -25°C and 70°C
Voltage influence
±2.5% max. of sensing distance
within a range of ±10% of rated
power supply voltage
±2.5% max.
of sensing dis-
tance within a
range of ±20%
of rated power
supply voltage
±2.5% max. of sensing distance within a range of ±10%
of rated power supply voltage
Insulation resistance 50 M min. (at 500 VDC) between energized parts and case
Dielectric strength
1000 VAC 50/60 Hz for 1 min between energized part and case
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s
2
for 3 times each in X, Y, and Z directions
Destruction:
500 m/s2 for 10
times each in X,
Y, and Z direc-
tions
Protective structure
IEC60529 IP67
Connection method
Pre-wired models (standard length: 2 m)
Weight
(Packed state)
30 g
Approx. 45 g
Approx. 70 g
Approx. 180 g
Material
Case
Heat-resistant ABS resin
Diecast aluminum
Heat-resistant
ABS resin
Sensing
surface
Heat-resistant ABS resin
Accessories
Mounting bracket,
instruction manual
Instruction manual
F502-EN2-04.book Seite 55 Dienstag, 26. Juli 2005 5:48 17