vi
Unit Versions of NSJ-series NSJ Controllers
Unit Versions
A “unit version” has been introduced to manage NSJ Controllers in the NSJ
Series according to differences in functionality accompanying product
upgrades.
Notation of Unit Versions
on Products
The unit version is given to above the lot number on the nameplate of the
products for which unit versions are being managed, as shown below. The
Controller Section of the NSJ Controllers has the same architecture as a CJ-
series CJ1-H CPU Unit with unit version 3.0. The unit version of NSJ Control-
lers thus starts from unit version 3.0.
Confirming Unit Versions
with Support Software
The CX-Programmer can be used to confirm the unit version using one of the
following methods.
•
Using the
PLC Information
• Using the
Unit Manufacturing Information
(This method can be used for
Special I/O Units and CPU Bus Units as well.)
Note
CX-Programmer version 6.1 or higher is required to go online with NSJ
@
-
@@@@
(B)-G5D Controllers. CX-Programmer version 7.0 or higher is required
to go online with NSJ
@
-
@@@@
(B)-M3D Controllers.
PLC Information
• If you know the device type and CPU type, select them in the
Change
PLC
Dialog Box, go online, and select
PLC - Edit - Information
from the
menus.
• If you don't know the device type and CPU type, but are connected
directly to the Unit on a serial line, select
PLC - Auto Online
to go online,
and then select
PLC - Edit - Information
from the menus.
In either case, the following
PLC Information
Dialog Box will be displayed.
NSJ-series NSJ Controller
NSJ8-TV01-G5D
NSJ CONTROLLER
Ver.3.0
Lot No. 01Y05
OMRON Corporation
MADE IN JAPAN
Product nameplate
Unit version
Example for Unit version 3.0
Lot No. (01 November 2005)
▲
Unit version
