![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h-nc112/sysmac-c200h-nc112_operation-manual_742431034.webp)
25
Outputs
1.6 k
Ω
(1/2 W)
Original adjustment command
output
0 V
Constant-
voltage
circuit
A1
B2
1.6 k
Ω
(1/2 W)
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
Power for output, 24 VDC
Power for output, 5 VDC
CCW pulse output/direction output (w/1.6 k
Ω
resistor)
CCW pulse output/direction
output
Note: The CW/CCW pulse outputs or the
pulse/direction outputs can be selected by
the DIP switch on the rear panel.
CW pulse output/pulse (CW+CCW) out-
put (w/1.6 k
Ω
resistor)
CW pulse output/pulse (CW+CCW)
output
0 V
0 V
Deviation counter reset output
0 V
Provide a power supply of either
5 or 24 VDC.
The internal circuit will be
damaged if both the 5 and 24
VDC power sources are
connected.
Wiring