No.16S019-05
20/62
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User’s Guide
5.2 Power and Control Signal Connector
HR10A-7R-6PB
(
Hirose
)
or equivalent
This connector is for the power supply and input /output signals.
The power from this connector is priority power for the camera when the power supplies through this connector
and PoE at same time.
Use HR10A-7P-6S (Hirose) or equivalent for the cable side.
Pin assignment
Pin No.
Signal Name
IN /
OUT
Voltage
1
GND
IN
0 V
2
I/O-1
OUT
+3.3 V Open Collector
3
I/O-2
OUT
+3.3 V Open Collector
4
TRG_In-
(Opt. Isolated -)
IN
Low: Smaller than +1.0 V
High: +3.0 to +26.4V
* potential difference between TRG_In-
and
5
(Opt. Is)
IN
6
POWER IN
IN
+10.8 to +26.4 Vdc
Configuration of I/O-1 (Pin No.2) and I/O-2 (Pin No.3)
Output pin can be assigned through register setting or GenICam Command.
GenICam command
I/O-1 (Pin No.2) / I/O-2 (Pin No.3)
1) FrameTriggerWait (initial setting for I/O-1)
2) UserOutput
3) ExposureActive (initial setting for I/O-2)
4) TriggerAuxiliary
5) TriggerInternal
6) SensorReadOut
7) StrobeSignal
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.