No.17S010-01
15/68
STC-MBS43U3V / STC-MCS43U3V / STC-MBS163U3V / STC-MCS163U3V
Product Specifications and Use’s Guide
Precautions
(*1) When selecting 8bits output, the priority mode (Image quality / Frame rate) can be selectable.
When selecting “Image quality”, the maximum frame rate is reduced, but the low noise image is acquiring.
When selecting “Frame rate”, the camera can be operated with the fastest frame rate of this camera, but noise
level is greater than “Image quality” selected image.
Please test and select suitable priority mode for the application.
(*2) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
(*3) The frame rate does not increase by the binning function.
(*4) The camera operates as USB3.0 standard even the camera connecting to a USB 2.0 port. Please careful
about the power consumption of the camera when the camera connecting to USB2.0 port.
The guideline to perform the full frame rate with full resolution of camera
The data transfer speed on the USB bus is depending on the performance of USB host controller.
The data transfer speed on the USB bus is very important to obtain full frame rate with full resolution. (527.1 fps @
0.4M, 238 fps @ 1.6M)
Renesas / Fresco Logic host controller improved the data transfer speed drastically in the second generation.
However, the transferring speed of Intel chipset is 10 to 20% faster than these host controllers.
When using USB3.0 interface PCI Express board, please insert it to the PCI Express Gen2.0 (5.0[GT/s]) slot. If
non-PCI Express Gen2.0 (5.0[GT/s]) is used, data transfer speed could decrease by about 50%.
If the frame rate is slow due to the performance of USB host controller, the frame rate of camera should adjust
based on the performance of USB host controller. This may resolve to increase the frame rate.
PC resources may have consumed during the image processing (color interpolation, image display, etc.) with huge
image data from camera.
Camera Setting
Environment
Parameter
Setting
Parameter
Setting
Gain Up
0 dB
Light Source
Light Box (White)
AGC
Off
Color temperature 5,100K
White Balance
Optimum
Lens
Electrical Shutter 1/30 seconds
F on Lens
F5.6
Black Level
Optimum
Target Luminance IM-600 (Topcon)
Gamma
Factory Setting
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
