Omron STC-MBS163U3V Product Specifications And User'S Manual Download Page 20

Page: 20 / 68

No.17S010-01

20/68

STC-MBS43U3V / STC-MCS43U3V / STC-MBS163U3V / STC-MCS163U3V
Product Specifications and Use’s Guide

4.4

Environmental Specifications

Model Number

STC-MBS43U3V

STC-MCS43U3V

Operational

Temperature /

Humidity

Minimum

Environmental Temperature: 0 deg. C,

Environmental Humidity: 0 to 85 %RH (No condensation)

Maximum

Camera housing temperature (top plate) shall not exceed 54 deg. C (*1),

Storage Temperature / Humidity

Environmental Temperature: -25 to +70 deg. C,

Environmental Humidity: 0 to 85 %RH (No condensation)

Vibration

20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each

Shock

Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant

Model Number

STC-MBS163U3V

STC-MCS163U3V

Operational

Temperature /

Humidity

Minimum

Environmental Temperature: 0 deg. C,

Environmental Humidity: 0 to 85 %RH (No condensation)

Maximum

Camera housing temperature (top plate) shall not exceed 54 deg. C (*1)

Storage Temperature / Humidity

Environmental Temperature: -25 to +70 deg. C,

Environmental Humidity: 0 to 85 %RH (No condensation)

Vibration

20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each

Shock

Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS Compliant

(*1) Please insure the camera is installed with the appropriate heat dissipation. If camera has a mounted lens and a tripod

with an aluminum plate, this could decrease the camera housing temperature for heat dissipation. When the internal
temperature sensor on the camera shows less than 64 deg. C, the camera housing temperature (top plate) will be less
than 54 deg. C.

Taking these steps will maintain the heat rating of the electronic components of the camera.

Upper side of camera

Measuring point

Aegis Electronic Group, Inc.

For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com

Summary of Contents for STC-MBS163U3V





































































Search results

Summary of Contents for STC-MBS163U3V

Reviews:

Related manuals for STC-MBS163U3V

Brands by name

Popular brands

Omron STC-MBS163U3V, Product Specifications And User'S Manual

Search results

Summary of Contents for STC-MBS163U3V

Reviews:

Related manuals for STC-MBS163U3V

Brands by name

Popular brands