25
6-3-3. Master Image Comparison
Master image comparison recording enables recording that uses difference between master
image and camera video as trigger.
[1]
Setting master image comparison
1) Click the [Setting] button in the main window, then select [Trigger recording settings]
tab in the Advanced setting window.
2) Select [Master image comparison] in the Event signal section.
3) Configure the recording time.
4) Select a camera to configure detection conditions.
5) Set a master image to compare for camera selected in 4).
Set an image file which was taken in the main window in advance.
(Both camera and master image’s resolution must be same.)
Master image setting is applied for all connected cameras.
6) Configure details of detection conditions for camera selected in 4).
7) Configure running interval of detection conditions set in 6).
8) Select recording target.
9) Close the Advanced Setting window by clicking the [OK] button.
2)
3)
4)
8)
7)
5)
6)