No.19S019-01
1
25
STC-APB503PCL / STC-APC503PCL
Product Specifications and Use’s Guide
Command No.
Command Description
80H:
E2P [7..0]
[EEPROM control] Default data: E2P[7:0] = 00H
Controls the data writing to the EEPROM.
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D1
No Function
Always set as “0000000”
D0
Data writes to the EEPROM
0: Prohibited
1: Accept
Note: This bit is cleared to “0” automatically after the data writes into the EEPROM.
90H:VASA [7..0]
91H:VASA [15..8]
[Vertical ROI_A Start line] Default data: VASA [15..0] = 54, Data range: 0 to 2,004,
Data adjustable unit: 4 pixels
Sets the start line (vertical) of the ROI.
The actual start line of the ROI = this value (VASA)
A0H:VAHA [7..0]
A1H:VAHA [15..8]
[Vertical ROI_A Effective lines] Default data: VAHA [15..0] = 1,944, Data range: 0 to 2,005,
Data adjustable unit: 4 lines
Sets the effective lines (image height) of the ROI.
B0H:HASA [7..0]
B1H:HASA [15..8]
[Horizontal ROI_A Start pixel] Default data: HASA [15..0] = 16, Data range: 0 to 2,750,
Sets the start pixel (horizontal) of the ROI.
The actual start pixel of the ROI = this value (HASA)
C0H:HAWA [7..0]
C1H:HAWA [15..8]
[Horizontal ROI_A Effective pixels] Default data: HAWA [15..0] = 2,592, Data range: 0 to 2,751,
Sets the effective pixels (image width, DVAL, LVAL) of ROI.
D0H:
DEF_M[7..0]
[Pixel defect correction control] Default data: PDC0 [7..0] = 0
D7
D6
D5
D4
D3
D2
D1
D0
D7
Set coordinate of
pixel defect position
0 to 1: Set the coordinate of the pixel defect position
Sets the correspond positions in D2H to D5H registers to the
pixel defect coordinate number is assigned in D1H register.
(This bit is cleared to “0” automatically after sets the
coordinate of the pixel defect position)
D6
Load coordinate of
pixel defect position
0 to 1: Read the coordinate of the pixel defect position
Reads the pixel defect coordinate number is assigned in D1H
register corresponding position to D6H to D9H
registers.
(This bit is cleared to “0” automatically after reads the
coordinate of the pixel defect position)
D5
Save coordinate of
defect pixel position
into the EEPROM
0 to 1: Save the coordinate of the pixel defect positions into
the EEPROM
All 512 coordinate numbers of the pixel defect position
information are saved into the EEPROM.
(This bit is cleared to “0” automatically after saves the
coordinate of the pixel defect positions)
D4 to D0
No Function
Always set as "00000"
D1H:
PDC1[7..0]
[Pixel defect correction coordinate number] Default data: PDC1 [7..0] = 0
Sets the coordinate number of the pixel defect correction.
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D0
Pixel defect correction
coordinate number
0 to 255
D2H:
PDC_WX [7..0]
D3H:
PDC_WX [15..8]
[Pixel defect X position (Set)] Default data: PDC_WX [15..0] = 0, Data range: 0 to 2,592
Sets the X (horizontal) coordinate position of the defect pixel for set the position.
D4H:
PDC_WY [7..0]
D5H:
PDC_WY [15..8]
[Pixel defect Y position (Set)] Default data: PDC_WY [15..0] = 0, Data range: 0 to 1,944
Sets the Y (vertical) coordinate position of the defect pixel for set the position.
