No.19S019-01
1
7
STC-APB503PCL / STC-APC503PCL
Product Specifications and Use’s Guide
3.3
Mechanical Specifications
Model Number
STC-APB503PCL
STC-APC503PCL
Dimensions
28 (W) x 28 (H) x 40 (D) mm (*1)
Optical Filter
No Optical Cut Filter
Optical Center Accuracy
Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Material
Aluminum alloy (AC)
Lens Mount (*2)
C Mount
Interface Connectors
Camera Link Connector: SDR x 1
Power-I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Camera Mounting
M2 screw holes (Three on top and both side, Four on bottom plates)
M4 screws holes (Tow on top and both side, Four on bottom plates)
Weight
Approximately 36 g
(*1)
Excluding connectors
3.4
Environmental Specifications
Model Number
STC-APB503PCL
STC-APC503PCL
Operational Temperature / Humidity
Environmental Temperature: 0 to +45 deg. C (Camera housing temperature shall not 64 deg. C) (*1)
Environmental Humidity: 0 to 85 %RH (No condensation)
Storage Temperature / Humidity
Environmental Temperature: -20 to +65 deg. C, Environmental Humidity: 0 to 80 %RH (No condensation)
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each
Shock
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each
Standard Compliancy
EMS: EN61000-6-2, EMI: EN55011
RoHS
RoHS Compliant
(*1) Please insure the camera is installed with the appropriate heat dissipation to keep the camera housing temperature
(top plate) is less than 64 deg. C when the camera using the ambient temperature is exceeded 45 deg. C.
If the camera has a mounted lens and a tripod with an aluminum plate, this could decrease the camera housing
temperature for the heat dissipation.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
Measuring point
