No.16S058-01
24/49
STC-HD133 Series (STC-HD133DV / STC-HD133SDI) /
STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide
b) Way to load the camera settings from the file
Select “Open setting file folder” under “File” in the menu. Then select the camera setting file.
Select “Write EEPROM” button to load the camera settings from the file.
The below message is appeared when the camera settings load are finished. Then select “OK”
button.
c) Way to verify the camera settings with the settings in the file.
Select “Open setting file folder” under “File” in the menu. Then select the camera setting file.
Select “Verify” button to start the camera settings verification.
The below message is appeared when the verification is correctly done. Then select “OK” button.
The below message is appeared if the some settings are not matched. Then select “OK” button.
d) Way to change the usable function
Select “Lock” under “Mode” in the menu.
Select unusable function (cannot select in the software) then select “OK” button.
