![background image](http://html1.mh-extra.com/html/omron/sc20g2/sc20g2_operation-manual_742413086.webp)
5. Setup of security
It is possible to change a security level (permitted level of access to a card) by setup with this
product.
1
The initial value of a user name, a password, a community user name, and
a password is as follows.
User name:OMRON
Password:admin
The community of SNMP is as follows.
Read:public
Read / Write:admin
Community of read / write and password are the same.
2
The outline of a security setup
When setting up a security level, "HTTP Security Control" is first set as "Enable"
from a setting menu by Telnet or serial connection, after that, By using "Access
Control Table" on Telnet / serial connection or "access control" on a Web screen,
the IP address which permits connection is set up.
Refer to the lower figure for the relation of each setup.
start
84