Omron S8BA-24D24D480SBF, User Manual

Page: 43 / 82

3 Installation and connection
3 - 10 S8BA-series Uninterruptible Power Supply (UPS) User’s Manual (U726)
• Crimping tool
Note Make sure that the wire insulation outer diameter is less than the inner diameter of the insulated sleeve of
the recommended ferrule terminal.
1
Insert the tip of a flat blade screwdriver with a thin blade into the square hole at the right of the
terminal block.
Use a flat blade screwdriver of the following size.
20A: 2.5mm or less
40A: 3 mm or less
Then, the cable lock is released.
4 12 12 14 AI4.0-12 GY H4.0/20D FE-4.0-12N-GY
6 10 12 14 AI6.0-12 YE H6.0/20 FE-6.0-12N-YE
10 8
12 14 AI10-12 RD H10.0/22EB FE-10-12N-RD
18 20 AI10-18 RD H10.0/28 FE-10-18N-RD
16 6 18 20 AI16-18 BU H16.0/28 FE-16-18N-BU
Compression range
(mm)
Model Manufacturer
Specialist
crimping tool
0.25 to 6mm CRIMPFOX6
Manufactured by Phoe-
nix Contact
0.5 to 6mm CRIMPFOX6T-F
0.4 to 10mm CRIMPFOX10S
10 to 25mm CRIMPFOX 25R
0.14 to 6mm PZ6 Roto L
Manufactured by
Widemüller
6 to 16mm PZ16
0.24 to 5mm variocrimp 4
Manufactured by
WAGO
6 to 16mm variocrimp 16
Connecting a cable to the terminal block
Applicable wire
Ferrule
conductor
length
(mm)
Insulation
stripping mar-
gin [mm]
(when using
ferrule termi-
nals)
Recommended ferrule terminals
(mm
2
)
(AWG)
Manufactured
by Phoenix
Contact
Manufactured
by Widemüller
Manufactured by
WAGO