Omron R8IT, Instruction Manual

Page: 15 / 56

15
How to Use the Graph Function
Date of
Measurement
Blood Pressure Values
(systolic/diastolic)
(mmHg)
Month/Days of a Week
Pulse
Rate
Detail Screen of Data
in Flashing Display
If the systolic blood pressure is higher than 170mmHg
When a systolic blood pressure above 170 mmHg is measured twice, the
(
, ) symbol is displayed in the graph.
When a systolic blood pressure
above 170 mmHg is measured
three times, the (
, ) symbol
disappears and the screen
automatically changes to
the “hypertension display”.
The maximum displayed blood
pressure value (y-axis) will
change from 170 mmHg
to 210 mmHg.
Display screen where
the systolic blood
pressure values
higher than 170
mmHg are measured
twice Graph Display Screen
of Hypertension Type
Explanation of the graph display
When you push the GRAPH button, the
latest measurement appear in a flashing
display. In the example shown to the right,
measurement is made at 10:40 P.M. on
January 31. The graph shows that the
systolic blood pressure is 140 mmHg (top
of the vertical bar), the diastolic blood
pressure is 95 mmHg (bottom of the
vertical bar), and the pulse rate is 90 beats
a minute (
L ).
When you push the memory button in the
graph display the details of the
measurement will appear. Pushing the
graph button again will bring you back
the graph display. You can use (
; : )
arrows in the graph and memory display
to leaf through the measurements.