![background image](http://html1.mh-extra.com/html/omron/r88d-1snx-ect-series/r88d-1snx-ect-series_startup-manual_744171006.webp)
6
Precautions
•
When building a system, check the specifications for all devices and equipment that will make
up the system and make sure that the OMRON products are used well within their rated
specifications and performances. Safety measures, such as safety circuits, must be
implemented in order to minimize the risks in the event of a malfunction.
•
Thoroughly read and understand the manuals for all devices and equipment that will make up
the system to ensure that the system is used safely. Review the entire contents of these
manuals, including all safety precautions, precautions for safe use, and precautions for correct
use.
•
Confirm all regulations, standards, and restrictions that the system must adhere to.
•
Check the user program for proper execution before you use it for actual operation.
Trademarks
•
Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in
Japan and other countries for OMRON factory automation products.
•
Windows is either registered trademarks or trademarks of Microsoft Corporation in the USA
and other countries.
•
EtherCAT
®
is registered trademark and patented technology, licensed by Beckhoff Automation
GmbH, Germany.
•
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
•
Other company names and product names in this Guide are the trademarks or registered
trademarks of their respective companies.
Software Licenses and Copyrights
The NJ-series CPU Units and Sysmac Studio incorporate certain third party software. The
license and copyright information associated with this software is available at
http://www.fa.omron.co.jp/nj_info_e/.
Summary of Contents for R88D-1SNx-ECT Series
Page 17: ...17 2 Approach the drive from top to down 3 Tight the upper part 4 Tight the down part...
Page 38: ...38 6 Add the Emergency stop button 7 Add the Reset button 8 Edit I O Map variables...
Page 58: ...58 11 Results Wizard step 5 Save to EEPROM Finish...
Page 59: ...2016 0616 0616 I823 E1 01 Note Do not use this document to operate the Unit...