http://www.orion.ua
5
Note:
Only use the steam push button when the steam iron has reached the steam or
maximum temperature.
Do not press this burst steam button more than 3 times at once. For optimal
steam output, leave an interval of at least four seconds between pressing the
burst steam button.
The burst steam feature can be used with Dry or Steam ironing as desired.
Never direct the steam towards people and animals. Burns or serious injury may
occur.
Vertical shot of steam
1. Hang your clothes on a hanger
2. When the temperature control knob is set to a steam setting (between “
” to
“MAX”) vertical steam can be used.
3. Ensure that there is enough water in the water tank.
4. Simply hold the iron vertically, positioned in front with a slight distance from the
item to be steamed, and press the burst steam button.
Note:
Never direct the steam towards people and animals. Burns or serious injury may
occur.
AUTOMATIC ANTI-CALC FUNCTION
Your iron contains an anti-calc cartridge to reduce scale deposits. This considerably
prolongs the operational life of your iron.
The anti-calc cartridge is an integral part of the water tank and dose not needs to be
replaced.
AUTOMATIC ANTI-DRIP FUNCTION
Your iron have anti-drip function. The iron automatically stops generating steam when
the temperature is too low to prevent water form dripping out of the soleplate.
SELF CLEAN FUNCTION
1. Use the self clean function once every two weeks. If the water in your area is
very hard, the self cleanfunction should be used more frequently.
2. Make sure the iron is unplugged.
3. Set the steam control knob to OFF position.
4. Fill the water tank to the maximum level.
5. Put the plug in the wall socket.
6. Select the maximum ironing temperature.
7. Unplug the iron when the temperature pilot light has gone out.
8. Hold the iron over the sink
press and hold the self clean button for 5-10seconds
and gently shake the iron.
9. Repeat the self clean process if the iron still contains a lot of impurities.
AUTO-SHUT-OFF FUNCTION
The auto-shut-off function automatically switches off the iron if it has not been moved for
a while.The auto-off pilot light starts flashing (or the buzzer will start beeping) to indicate
that the iron has been switched off by the auto-shut-off function.
