Omron NS-RUNTIME - SOFTWARE User Manual Download Page 47

Page: 47 / 157

3-2 System Settings

3-9

No Item

Details

Maximum Screen Size

Set the main window size of the NS-Runtime.
Width: 1 to 3,840 dots, Height: 1 to 2,400 dots

Changed screen/sheet size will be modified as follows.

Before change

After change

Screen/sheet for which a size exceeding the
Width/Height have been set.

The size will be changed to the Width/Height set
in the Maximum Screen Size.

Screen/sheet for which a size not exceeding the
Width/Height have been set.

The screen size will not be changed.

3-2-7 Function

Keys

In the NS-Runtime, there are no function key tab page settings.

Summary of Contents for NS-RUNTIME - SOFTWARE






























































































































































Search results

Summary of Contents for NS-RUNTIME - SOFTWARE

Reviews:

Related manuals for NS-RUNTIME - SOFTWARE

Brands by name

Popular brands

Omron NS-RUNTIME - SOFTWARE, User Manual

Search results

Summary of Contents for NS-RUNTIME - SOFTWARE

Reviews:

Related manuals for NS-RUNTIME - SOFTWARE

Brands by name

Popular brands