background image

5-3 Special Screen 

5-10 

 

 

No Item 

Function 

5 Received 

Message 

Displays the data of received results of the FINS command. 

ms 

Displays the time lapsed in ms from sending the FINS command until 
receiving the FINS response. 

Comment 

Displays the status according to the completion code after reception. 

5. Click the

 Exit

 Button to close the communication test screen. 

5-3-5 Version 

Display 

This function is used to display information on the NS-Runtime version. 

Display the Version Display Screen by using operations in the System Menu as follows. 

 

1. Click the 

Display

 Button next to the System Version

 

Button. The version display screen 

will be displayed. 

 

2.  The following items will be displayed.

 

No Item 

Function 

Model 

Displays the product model. 

Version 

Displays the NS-Runtime version. 

System Version 

Displays the system version that the NS-Runtime supports. 

Data Version 

Displays project data version. 
No version will be displayed when the NS-Runtime does not support 
the model of transferred project data. 

Disk Free Space 

Displays the free space of the drive in which NS-Runtime is installed. 

3. Click the 

OK 

Button to close the System Version Screen. 

Summary of Contents for NS-NSRCL Series






























































































































































Reviews: