background image

9

Assembling the 

main unit

3

1. Secure the removable water 

tank in the main unit.

Press down on the tank until you hear it 
click into place. 

Caution

Do not affix the removable water tank to the main unit 
while it is wet on the outside.

2. Attach the inhalation hose and 

mouthpiece or other 
attachment. 

3. Make sure the power button is 

in the “OFF” position and 
connect the power cord to the 
main unit and a wall outlet.

Note:  Use only the 

original power cord.

4. Turn on the power button and 

make sure all the Error LEDs on 
the error display light up and 
then turn back off.

If one or more of the Error LEDs remain lit, 
see “Troubleshooting” ( 

 Page 22) for 

more information about where to look for 
the problem. The product will not operate if 
Error LEDs 

 through 

 are lit up. 

If the removable water tank is not attached 
properly, an audible alarm will sound. 
Reattach the tank properly. 

Note:  You may hear the sound of the fans 

operating when the power button is turned 
on. This is normal and does not indicate a 
malfunction.

All LEDs lit

No LEDs lit

5. The product is now ready for 

use.

Before Inhalation

Summary of Contents for NE-U780





























Reviews: