MS4800/2800
Safety sensors
Specifications
Model
MS4800_ -E_ -_ _ _ -_ _ _ _
MS2800_ -E_ -_ _ _ -_ _ _ _
Sensor type
Type 4
Type2
Normal Operating range
Reduced range (DIP-switch 6)
14 mm resolution: 0.3 - 7 m, 30 mm resolution: 0.3 - 20 m
14 mm resolution: 0.3 - 3 m, 30 mm resolution: 0.3 - 8 m
Beam pitch
14 mm resolution: 10 mm; 30 mm resolution: 20 mm
Protective height
14 mm resolution: 280 - 1800 mm; 30 mm resolution: 240 - 2120 mm
Detection capability
14 mm resolution: 14 mm non-transparent; 30 mm resolution: 30 mm non-transparent
Effective aperture angle (EAA)
Within ±2,5°
Within ±5,0°
for the emitter and receiver at a detection distance of at least 3m according to IEC61496-2
Light source
Infrared LED's (880 nm), Power Dissipation: 180 mW, Class 1 per EN60825-1
Supply voltage (Vs)
24 VDC ±20%, according EN/IEC60204, able to cover a drop of voltage of at least 20 msec
OSSD
Two safety related PNP transistor output, load current 625 mA max.
*1
, short circuit protection
*1
Up to 12 m we recommend to use the F39-JMR cables, to use longer cables and a current of 625 mA the F39-JMR cables are necessary.
Connection example
Using a manual restart and an external device monitoring
Auxiliary Output (non safety output)
One PNP output sourcing 100mA @ 24VDC. This output follows the OSSD's
Output operation mode
OSSD output: Light-ON
Test functions
Self-test (after power ON and during operation)
Safety-related functions
All versions: Auto reset/interlock with manual reset, EDM (external device monitoring) Advanced versions only: fixed blanking,
floating blanking, muting
Response time
ON to OFF: 14 to 59 ms
Ambient light intensity
Incandescent lamp: 3000 lx max. (light intensity on the receiver surface)
Ambient temperature
Operating: -10°C to +55°C, storage: -25°C to +70°C (without icing or condensation)
Degree of protection
IP65 (IEC60529)
Connection methode
Flexible cable with M 12 connection: receiver: 8 pins, transmitter: 5 pins
Materials
Case: Polyurethane powder painted aluminium, cap: polycarbonate, front window: acrylic, mounting brackets: cold rolled steel
Size (cross section)
39 x 50 mm
Receiver indicator lights
Individual Beam Indicator (IBI), Interlock, Blanking activ, RUN and STOP state, error codes
Transmitter indicator lights
ON, OFF, failure
AOPD (ESPE)
Type4 acc. IEC 61496-1
Type2 acc. IEC 61496-1
Suitable for safety control systems
Cat. 4 acc. EN954-1
Cat. 2 acc. EN954-1
Safety Integrity Level
SIL 3 according IEC 61508
PFH
3,5 x 10
-8
K1 and K2 forcibly guided relay’s expected
Power supply
+24VDC
GND
Protective Earth
Fuse
Earth GND +24V
DC
MTS
Ret.
MTS
Earth GND +24V
DC
EDM
Start Aux.
OSSD1 OSSD2
K1
K2
*2
K1
K2
*2
*1
MS4800/MS2800
Transmitter
MS4800/MS2800
Receiver
*1
MTS requires a NC contact. If
MTS is not used, please connect
MTS and MTS Ret. Directly.
*2
The K1 and K2 coils must be
suppressed. Please refer to the
documentation of the relays or
contactors for further reference.
13
