20
4. Technical Data
4.1. Technical parameters
Power supply:
2 AA rechargeable NiCd or NiMH
batteries or 2 AA alkaline batteries
Display:
liquid-crystal
Data storage:
internal solid state memory
Data transmission:
USB optical cable
PC interface:
USB interface
Operating environment:
Temperature: 10 - 45 °C
Humidity: 10 - 95 %, non condensing
Atmospheric pressure: 70 - 106 kPa
Storage conditions:
Temperature: -20 - 50 °C
Humidity: 10 - 95 %, non condensing
Size (H x W x D):
70 x 99 x 30 mm
Weight:
app. 240 g (batteries included)
Blood pressure measurement method:
oscillometric
Blood pressure maximum storage:
over 400 automatic measurements
Pressure measurement range:
0-300 mmHg
0-40 kPa*
Static accuracy:
± 3 mmHg or 0,4 kPa or ± 2% of
measured value (stability: 2 years)
Blood pressure measurement range
indication:
30-260 mmHg
4-35 kPa*
Pulse rate measurement range:
40-200 beat per minute
Blood pressure measurement accuracy:
The OMRON M24/7 has been clinically
validated
Pressure sensor:
piezo-resistive
In ation:
automatically controlled pump
Safety:
maximum in ation 300 mmHg
(40 kPa*);
independent safety release valve
De ation and rapid air release:
automatic pressure release valve
Please note that the
OMRON M24/7
might not meet its performance speci cations
if stored or used outside the speci ed environmental conditions.
*Measuring and LCD displaying in kPa values is an option which can be selected
in the
OMRON BP Tracker Software
. The unit of measurement can be changed
later in the database.
For information on cuffs and their application, see 2.8.
This symbol shows that according to regulations OMRON M24/7
should be handled as electronic waste during disposal.
;
Blood pressure measurements determined with the algorithm
of an OMRON M24/7 monitor on adults are equivalent to those
obtained by a trained observer using the cuff/stethoscope
auscultation method Korotkoff phase V, within the limits prescribed
by the American National Standard for Electronic or Automated
Sphygmomanometers. The algorithm used in the OMRON M24/7
also ful ls the requirements of the British Hypertension Society
Validation Protocol for Automated Blood Pressure Measuring
Devices.
IM_EN.indd 20
19/07/2012 14:30:03
